View GS-12-0974_4769924.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 1 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. product specification 10 gbd sfp+ 1310 nm limiting transceiver trx10gdp0310c1 product features: hot pluggable sfp+ optical transceiver data rate transparent from 9.95 to 11.3 gbps low power consumption, 0.8 w typ. excellent emi performance transmission distance up to 10 km sm fiber 0 c to +70 c case operating temperature 1310 nm dfb laser duplex lc connector laser class 1 rohs 6/6 compliant applications : 10g ethernet 10gbase-lr/lw 10g fibre channel 1200-sm-ll-l fci?s sfp+ optical transceiver trx10gdp0310c1 is compliant with the sfp+ msa specifications (sff-8431 and sff-8432) and with 10gbase-lr/lw per ieee 802.3 as well as 1200-sm-ll-l per 10g fibre channel. it is rohs 6/6 compliant per directive 2002/95/ec and laser class 1 safety compliant per iec/cdrh. the sub- watt power consumption and the excellent emi performance allow system design with high port density. supported standards application standard data rate 10g ethernet lan/wan ieee 802.3 10gbase-lr/lw 10.3125 / 9.953 gbps 10g fibre channel 1200-sm-ll-l 10.518 gbps pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 2 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. table of contents table of contents ............................................................................................................. ............................ 2 functional description ........................................................................................................ ......................... 3 electrical characteristics .................................................................................................... ......................... 4 absolute maximum ratings ...................................................................................................... ................... 4 recommended operating conditions .......................................................................................................... 4 low speed characteristics ..................................................................................................... ..................... 4 sfi module transmitter input characteristics .............................................................................................. 5 sfi module receiver output characteristics .................................................................................... ........... 5 optical characteristics ....................................................................................................... .......................... 6 general parameters ............................................................................................................ ........................ 6 optical transmitter ........................................................................................................... ........................... 6 optical receiver .............................................................................................................. ............................ 6 application information ....................................................................................................... ......................... 7 connector pinout............................................................................................................... .......................... 7 electrical pin definition ..................................................................................................... ........................... 7 application schematics ........................................................................................................ ....................... 8 interfacing the transceiver ................................................................................................... ....................... 9 digital optical monitoring .................................................................................................... ........................ 9 module outline ................................................................................................................ .......................... 10 module safety & compliance .................................................................................................... ................. 11 esd & electromagnetic compatibility ....................................................................................................... 11 eye safety .................................................................................................................... ............................... 12 ordering information .......................................................................................................... ........................ 13 pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 3 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. functional description the transmit path is based on an ac coupled 100 ohm differentially terminated driver coupled to a 1310 nm dfb laser. laser output may be disabled by pulling th e transmitter disable (tx_dis) line high which is its default state when leaving the input floating due to an internal pull-up resistor. a fault condition is raised upon detection of an abnormal laser state. the receive path consists of a receiver optical sub-assembly (rosa) for optical to electrical conversion, followed by a limiting amplifier boosting the electrical signal. a loss of signal (los) status line provides information to facilitate easy link detection. complete digital optical monitoring is implemented in compliance to sff-8472 and made accessible via the 2-wire interface providing real time information about all important module parameters and status information. pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 4 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. electrical characteristics absolute maxi mum ratings rating conditions symbol min max units storage ambient temperature ? stg -40 +85 c powered case temperature ? c 0 +75 c operating relative humidity non condensing rh 0 95 % supply voltage range v cct/r -0.5 4.0 v any stress beyond the maximum ratings may result in permanent damage to the device. specifications are guaranteed only under recommended operating conditions. recommended oper ating conditions parameter conditions symbol min typ max units operating case temperature ? case 0 +70 c power supply voltage v cct/r 3.135 3.30 3.465 v dc common mode voltage sfi signals v cm -0.5 4.0 v low speed characteristics parameter conditions symbol min typ max units supply current transmitter @ v cct i vcctx 150 ma supply current receiver @ v ccr i vccrx 80 ma total supply current @ v cct/r i vcc 300 ma power consumption 0.8 1.0 w tx_fault, rx_los host vcc range 2 v ? 3.47 v, i ol_max = 4 ma v ol 0 0.4 v v oh host_ vcc ? 0.5 host_ vcc + 0.3 tx_dis, rs0, rs1 low voltage ttl v il -0.3 0.8 v ih 2.0 vcct + 0.5 scl, sda host vcc range 3.13 v ? 3.47 v, i ol_max = 4 ma v il -0.3 vcct * 0.3 v ih vcct * 0.7 vcct + 0.5 v ol 0.0 0.4 v oh host_ vcc ? 0.5 host_ vcc + 0.3 pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 5 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. sfi module transmitter input characteristics parameter conditions symbol min typ max units nominal data rate 10.3125 gbd reference differential input impedance z d 100 ? input ac common mode input voltage 0 25 mv (rms) differential input voltage swing 2 x |v(td+) ? v(td-)| v id 150 900 mv differential input s-parameter 0.01 ? 4.1 ghz sdd11 1 ) db 4.1 ? 11.1 ghz 2 ) db differential to common mode conversion 3 ) 0.01 ? 11.1 ghz scd11 -10 db total jitter tj 0.28 ui(p-p) data dependent jitter ddj 0.1 ui(p-p) uncorrelated jitter uj 0.023 rms 1) reflection coefficient given by equation sdd11(db) < -12 + 2 x sqrt(f), with f in ghz. 2) reflection coefficient given by equation sdd11(db) < -6.3 + 13 x log10(f/5.5), with f in ghz. 3) common mode reference impedance is 25 ? . sfi module receiver out put characteristics parameter conditions symbol min typ max units nominal data rate 10.3125 gbd reference differential output impedance z d 100 ? termination mismatch ? z d 5 % output ac common mode voltage 7.5 mv (rms) differential output amplitude r load = 100 ohm, 2 x |v(rd+) ? v(rd-)| v ospp 350 530 800 mv output rise and fall time 20 % to 80 % t r , t f 28 ps differential output s-parameter 0.01 ? 4.1 ghz sdd22 1 ) db 4.1 ? 11.1 ghz 2 ) db common mode output return loss 4 ) 0.01 ? 2.5 ghz scc22 3 ) db 2.5 ? 11.1 ghz -3 db deterministic jitter dj 0.42 ui(p-p) total jitter see sfp+ msa tj 0.7 ui(p-p) 1) reflection coefficient given by equation sdd22(db) < -12 + 2 x sqrt(f), with f in ghz. 2) reflection coefficient given by equation sdd22(db) < -6.3 + 13 x log10(f/5.5), with f in ghz. 3) reflection coefficient given by equation scc22(db) = -7 + 1.6 x f, with f in ghz 4) common mode reference impedance is 25 ? . pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 6 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. optical characteristics general parameters parameter conditions min modal bandwidth (mhz*km) symbol min typical 10gbd units operating range smf l op 10 km optical transmitter parameter conditions symbol min typ max units center wavelength trp 1290 1310 1330 nm side mode suppression ratio smsr 30 db average launch power p avg -6.0 -0.5 dbm optical modulation amplitude p oma -5.2 1 dbm extinction ratio er 3.5 db relative intensity noise rin -128 db/hz optical receiver parameter conditions symbol min typ max units center wavelength c 1260 1310 1355 nm average input power p avg 0.5 dbm receiver sensitivity prbs 2 31 -1, ber < 1*10 -12 @10.3125gbd p in(oma) -18 -15 dbm stressed receiver sensitivity prbs 2 31 -1, ber < 1*10 -12 @ 10.3125gbd p in(oma) -15 -12 dbm loss of signal assert p avg_as -30 -21 dbm de-assert p oma_deas -19 -15 loss of signal hysteresis hyst 0.5 db note: the specified characteristics are met within the recommended range of operating. unless otherwise noted, typical data are quoted at nominal voltages and +25c ambient temperature. pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 7 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. application information connector pinout electrical pin definition pin logic symbol name / description note 1 veet module transmitter ground 1 2 lvttl-o tx_fault module transmitter fault 3 lvttl-i tx_dis transmitter disable; turns off transmitter laser output 4 lvttl-i/o sda 2-wire serial interface data line 2 5 lvttl-i scl 2-wire serial interface clock 2 6 mod_abs (=mod_def0) module absent, shorted to module ground 7 lvttl-i rs0 receiver rate select 8 lvttl-o rx_los receiver loss of signal indication active low 9 lvttl-i rs1 transmitter rate select 10 veer module receiver ground 1 11 veer module receiver ground 1 12 cml-o rd- receiver inve rted data output 13 cml-o rd+ receiver data output 14 veer module receiver ground 1 15 vccr module receiver 3.3 v supply 16 vcct module transmitter 3.3 v supply 17 veet module transmitter ground 1 18 cml-i td+ transmitter non-inverted data input 19 cml-i td- transmitter inverted data input 20 veet module transmitter ground 1 1. module ground pins vee are isolated from the module case. 2. shall be pulled up with 1k-10k ohms to a voltage between 3.13 v and 3.47 v on the host board. pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 8 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. application schematics recommended electrical connections to transceiver are shown below. pull-ups: 1k ? 10k ohms. pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 9 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. interfacing the transceiver communication is done by a serial 2-wire interface compatible to the i2c bus protocol. refer to sff-8472 for a more detailed explanation of the registers: base address a0h register content 0 - 95 serial transceiver id as defined in sfp msa 96 - 127 fci specific 128 - 255 reserved digital optical monitoring the transceiver offers the ability to monitor important module parameter during operation. all five parameters listed below are continuously monitored for getting information about the current module status. all data is calibrated internally; there is no need for external post processing. temperature internally measured temperature data is represented as two?s complement of a signed 16-bit value in increments of 1/256 c over a range of -40 to +100 c. accuracy is better than +/-3 c. supply voltage (vcc) internally measured supply voltage. represented as a 16-bit unsigned integer with the voltage defined as the full 16 bit value (0 ? 65535) with lsb equal to 100 volt, which yields to a total range of 0 to +6.55 volts. accuracy is better than +/-3 %. laser bias current the dfb laser bias current is represented as a 16 bit unsigned integer with the current defined as the full 16- bit value (0 ? 65535) with lsb equal to 2 a. accuracy is better than +/-10 %. optical transmitter power tx output power measurement is based on internal monitor diode feedback. represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 ? 65535) with lsb equal to 0.1 w. accuracy is better than +/-3 db over a range of pavg min to pavg max . receiver optical power rx input power measurement is based on photodi ode average current. represent ed as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 ? 65535) with lsb equal to 0.1 w. accuracy is better than +/-3 db over a range of -15 dbm to 0.5 dbm. note: the specified characteristics are met within the recommended range of operating conditions regarding temperature and volt age. base address a2h register content 0 - 55 alarm & warnings thresholds & limits 56 - 95 external calibration constants (not used) 96 ? 119 values from real time diagnostic monitoring 128 ? 247 customer specific, writable area 248 - 255 reserved pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 10 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. module outline all dimensions shown are in millimeters. pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 11 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. module safety & compliance fci?s sfp+ lr module is designed to meet international standards and requirements. the module is rohs compliant according to the european parliament requirements on the restriction of the use of hazardous substances in electrical and electronic equipment (rohs). the module optical output power meets class 1 requirements for laser safety. requirements standard module safety iec 60950-1:2001 en 60950-1:2001 rohs compliance rohs 6/6 directive 2002/95/ec amendment 4054 (2005/747/ec) laser safety (class 1) cdrh 21 cfr 1040.10 and 1040.11 (according fda) iec 60825-1 rev2 2007 (according iec) esd & electromagnetic compatibility requirements standard value emi (emission) fcc part 15 b en 55022 class b cispr 22 30 mhz ? 40 ghz at least 6 db margin to class b limit emi (immunity) iec 61000-4-3, 10 mhz ? 1 ghz no bit errors at sensitivity limit esd (electrical connector) eia/jesd22-a114-b mil-std 883c method 3015.7 2 kv 1 kv (sfi signals) esd (module case) air discharge en61000-4-2, criterion b 15 kv esd (module case) contact discharge en61000-4-2, criterion b 8 kv pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 12 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. eye safety this laser based singlemode transceiver is a class 1 product. it complies with iec 60825-1 edition 2 and fda performance standards for laser products (21 cfr 1040.10 and 1040.11) except for deviations pursuant to laser notice 50, dated july 26, 2001. class 1 laser product to meet laser safety requirements the transceiver sh all be operated within the absolute maximum ratings. note: all adjustments have been made at the factory prior to shipment of the devices. no maintenance or alteration to the device is required. tampering with or modifying the performance of the device will result in voided product warranty. failure to adhere to the above restrictions could result in a modification that is considered an act of ?manufacturing?, and will require, un der law, recertification of the modified product with the u.s. food and drug administration (ref. 21 cfr 1040.10 (i)). laser emission data wavelength 1310 nm maximum total output power (as defined by iec: within 7 mm aperture at 70 mm distance) 15.6 mw / 11.9 dbm beam divergence (full angle) / na (half angle) 11 / 0.1 rad product to p view rx tx laser e mission pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 13 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. ordering information application standard part number 10g ethernet lan/wan ieee 802.3 10gbase-lr/lw trx10gdp0310c1 10g fibre channel 10gfc 1200-sm-ll-l trx10gdp0310c1 pds: rev :a status:released printed: jan 03, 2012
number GS-12-0974 type product specification title page revision trx10gdp0310c1 (sfp+ lr module) 14 of 14 a authorized b y date j. blank 11 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. revision record rev page description ec# date a initial version. 11 july 2011 pds: rev :a status:released printed: jan 03, 2012

▲Up To Search▲

Price & Availability of GS-12-0974

	To Download GS-12-0974 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .